181
uuOperating the Switches Around the Steering WheeluBrightness Control
Continued
Brightness Control
When the power mode is in ON, you can use
the
(+/(- button to adjust instrument panel
brightness.
Brighten: Press the (+ button.
Dim: Press the
(- button.
You will hear a beep when the brightness
reaches minimum or maximum. Several
seconds after adjusting the brightness, you
will be returned to the previous display.
■
Brightness level indicator
The brightness level is shown on the driver
information interface while you are adjusting
it.
■
Adjusting the Instrument Panel Brightness
1Brightness Control
The brightness of the instrument panel will be
reduced when the following conditions have been
met:
• The power mode is in ON.
• The parking lights are turned on.
• The ambient lighting is low.
The brightness can be set differently for when the
exterior lights are on, and when they are off.
22 ACURA MDX-31TYA6000_02.book 181 ページ ２０２０年１１月５日 木曜日 午前１１時３９分
To Next Page
Loading...
Need help?
General
