625
uuChecking and Maintaining Wiper BladesuChanging the Front Wiper Blade Rubber
7. Insert the flat side of the new wiper blade
onto the bottom part of the holder. Insert
the blade all the way.
8. Install the end of the wiper blade into the
cap.
9. Slide the holder onto the wiper arm until it
locks.
10. Lower both wiper arms.
11. Set the power mode to ON and hold the
wiper switch in the MIST position until
both wiper arms return to the standard
position.
24 ACURA MDX-31TYA6200.book 625 ページ ２０２３年３月２日 木曜日 午後１２時４４分
To Next Page
Loading...
