Acura MDX - Page 106

104
uuIndicatorsu
Instrument Panel
Indicator Name On/Blinking Explanation Message
Blind spot
information (BSI)
Indicator
●
Comes on for a few seconds
when you set the power mode to
ON, then goes off.
●
Stays on while BSI is turned off.
—
●
Comes on when mud, snow, or
ice accumulates in the vicinity of
sensor.
●
Comes on while driving - Remove the
obstacle in the vicinity of sensor.
2 Blind spot information (BSI) System
P. 509
●
Comes on if there is a problem
with the system.
●
Comes on while driving - Have your vehicle
checked by a dealer.
18 ACURA MDX E-AWD-31TRX6100.book 104 ページ ２０１７年１１月１０日 金曜日 午前１０時２１分