509
uuWhen DrivinguBlind spot information (BSI) System
Continued
Blind spot information (BSI) System
Is designed to detect vehicles in specified alert zones adjacent to your vehicle,
particularly in harder to see areas commonly known as “blind spots.”
When the system detects vehicles approaching from behind in adjacent lanes, the
appropriate indicator comes on for a few seconds, providing assistance when you
change lanes.
■ How the system works
1Blind spot information (BSI) System
Important Safety Reminder
Like all assistance systems, BSI has limitations. Over
reliance on BSI may result in a collision.
The BSI alert indicator may not come on under the
following conditions:
• A vehicle does not stay in the alert zone for more
than two seconds.
• A vehicle is parked in a side lane.
• The speed difference between your vehicle and the
vehicle you are passing is greater than 6 mph (10
km/h).
• An object not detected by the radar sensors
approaches or passes your vehicle.
• A vehicle running in the adjacent lane is a
motorcycle or other small vehicle.
Failure to visually confirm that it is safe to
change lanes before doing so may result in
a crash and serious injury or death.
Do not rely only on the blind spot
information system when changing lanes.
Always look in your mirrors, to either side
of your vehicle, and behind you for other
vehicles before changing lanes.
Alert zone range
A: Approx. 1.6 ft. (0.5 m)
B: Approx. 10 ft. (3 m)
C: Approx. 10 ft. (3 m)
Radar Sensors:
underneath the
rear bumper
corners
Alert Zone
A
B
C
●
The transmission is in
(D or (S.
●
Your vehicle speed is
between 20 mph (32
km/h) and 100 mph
(160 km/h)
18 ACURA MDX E-AWD-31TRX6100.book 509 ページ ２０１７年１１月１０日 金曜日 午前１０時２１分
To Next Page
Loading...
Need help?
General
