Acura MDX User Manual

Continued
203
uuAdjusting the SeatsuHead Restraints
Controls
A passenger sitting in the second row center
seating position should adjust the height of
their head restraint to an appropriate position
before the vehicle begins moving.
To raise the head restraint:
Pull it upward.
To lower the head restraint:
Push it down while pressing the release
button.
Head restraints can be removed for cleaning or repair.
To remove a head restraint:
Pull the restraint up as far as it will go. Then push the release button, and pull the
restraint up and out.
To reinstall a head restraint:
Insert the legs back in place, then adjust the head restraint to an appropriate height
while pressing the release button. Pull up on the restraint to make sure it is locked
in position.
■
Changing the Second Row Center Seat Head Restraint
Position
*
■
Removing and Reinstalling the Head Restraints
1Removing and Reinstalling the Head Restraints
3 WARNING
Failure to reinstall, or correctly reinstall, the
head restraints can result in severe injury
during a crash.
Always replace the head restraints before
driving.
Front and second row head restraints
* Not available on all models
18 ACURA MDX E-AWD-31TRX6100.book 203 ページ ２０１７年１１月１０日 金曜日 午前１０時２１分

Acura MDX Specifications

General

Brand	Acura
Model	MDX
Category	Automobile
Language	English