uuBluetooth® HandsFreeLink®uHFL Menus
414
You can change the ring tone setting.
1. Press the SETTINGS button.
2. Rotate to select Bluetooth/Phone
Settings, then press .
u Repeat the procedure to select Ring
Tone.
3. Rotate to select Fixed, Mobile Phone
or Off, then press .
You can display a caller’s picture on an incoming call screen.
1. Press the SETTINGS button.
2. Rotate to select Bluetooth/Phone
Settings, then press .
3. Rotate to select Use Contact Photo.
4. Press to select On or Off.
■
Ring Tone
1Ring Tone
Fixed: The fixed ring tone sounds from the speaker.
Mobile Phone: The ring tone stored in the
connected cell phone sounds from the speaker.
Off: No ring tones sound from the speaker.
■
Use Contact Photo
18 ACURA MDX E-AWD-31TRX6100.book 414 ページ 2017年11月10日 金曜日 午前10時21分