617
uuIf a Tire Goes FlatuChanging a Flat Tire
*
Continued
4. Remove the cover on the cargo area lining
to access the shaft for the spare tire hoist.
5. Put the wheel nut wrench with the jack
handle bar on the hoist shaft.
Turn the wrench to the left to lower the
spare tire to the ground.
6. Keep turning the wheel nut wrench to
create slack in the cable.
7. Remove the bracket from the spare tire.
Jack Handle Bar
Wheel Nut Wrench
18 ACURA MDX E-AWD-31TRX6100.book 617 ページ ２０１７年１１月１０日 金曜日 午前１０時２１分
To Next Page
Loading...
