EasyManua.ls Logo

AcuRite 02007/06035RM - User Manual

AcuRite 02007/06035RM
20 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Instruction Manual
SAVE THIS MANUAL FOR FUTURE REFERENCE.
Questions? Contact Customer Support at
(877) 221-1252 or visit www.AcuRite.com.
CONTENTS
Unpacking Instructions ........... 2
Package Contents .................. 2
Product Registration ............... 2
Features & Benets: Sensor ..... 2
Features & Benets: Display.. .. 3
Setup .................................... 6
Sensor Setup ......................... 6
Display Setup ........................ 7
Setup Preferences .................. 8
Intelli-Time Clock .................... 8
Backlight Settings ................... 9
Placement Guidelines ............10
Using the Weather Station .....11
Troubleshooting ....................12
Care & Maintenance ............. 13
Replace Intelli-Time
®
Battery
....14
Calibration ...........................14
Specications ........................15
FCC Information ...................15
Customer Support .................16
Warranty..............................16
Weather Station
model 02007 / 06035RM

Table of Contents

Questions and Answers

  • T
    Thomas RuizAug 5, 2025
    How to fix AcuRite 02007/06035RM Weather Station when no outdoor sensor reception?
    • R
      Richard BergerAug 5, 2025
      If your AcuRite Weather Station shows no bars for outdoor sensor reception, try these steps: First, relocate the display unit and/or the outdoor sensor, ensuring they are within 330 feet (100 m) of each other. Second, keep both units at least 3 feet (.9 m) away from electronics like TVs, microwaves, and computers that could cause wireless interference. Third, use standard alkaline batteries (or lithium batteries in the sensor when the temperature is below -4ºF/-20ºC), avoiding heavy-duty or rechargeable batteries. Finally, allow up to 20 minutes for the display unit and sensor to synchronize after replacing the batteries.
  • J
    Joseph NguyenAug 10, 2025
    How do I reset the time on my AcuRite Weather Station after power loss?
    • D
      danielcarlsonAug 10, 2025
      If your AcuRite Weather Station lost power or the batteries were changed and the time is incorrect, the Intelli-Time battery needs to be replaced. Once the new battery is installed, time and date will need to be set manually.
  • W
    william08Aug 15, 2025
    Why is the AcuRite 02007/06035RM Weather Station forecast inaccurate?
    • B
      byrdsarahAug 15, 2025
      An inaccurate forecast on your AcuRite Weather Station could be due to several factors. First, remember that forecast icons predict future, not current, conditions. Also, the forecast will be blank for the first 4 hours after battery installation. Ensure your GEO region setting is correct; if near a border, test both regions. Verify that the time, date, GEO region, temperature, humidity, and pressure settings are accurate. You can also calibrate the forecast. If issues persist, reset the unit by pressing the “RESET” button inside the battery compartment and re-enter the time and date. Then, press the GEO button to cycle through the regions and select your correct region.
  • M
    Michele MaldonadoAug 20, 2025
    What to do if the AcuRite 02007/06035RM Weather Station display screen is not working?
    • H
      heatherpittmanAug 20, 2025
      If your AcuRite Weather Station's display screen isn't working, first check that the batteries are correctly installed and replace them if needed. If that doesn't work, reset the display by pressing the RESET button located in the battery compartment. Note that you'll need to enter the time and date after a reset. Also, the forecast will be blank for the first 4 hours after battery installation.
  • C
    combsjessicaAug 26, 2025
    Why is the outdoor temperature flashing or showing dashes on my AcuRite 02007/06035RM Weather Station?
    • J
      Jessica LunaAug 26, 2025
      If the outdoor temperature on your AcuRite Weather Station is flashing or showing dashes, wireless interference may be the cause. Try bringing both the sensor and display unit indoors and remove the batteries/power adapter from both. Make sure the A-B-C switch on both units match. Reinstall the batteries in the outdoor sensor, then reconnect the AC adapter and/or reinstall batteries in the display unit. Allow the units to sit within a couple of feet of each other for about 20 minutes to establish a strong connection.
  • R
    Robin WangAug 30, 2025
    How to correct inaccurate temperature or humidity readings on AcuRite Weather Station?
    • X
      xhowardAug 30, 2025
      To correct inaccurate temperature or humidity readings on your AcuRite Weather Station, ensure both the display unit and sensor are placed out of direct sunlight and away from any heat sources or vents. Also, make sure both units are positioned away from any sources of moisture.

Summary

Unpacking and Registration

Unpacking Instructions

Guide to safely removing and preparing the weather station for use.

Package Contents

Lists all items included in the weather station package for verification.

Product Registration

Instructions for registering the product to ensure warranty service and support.

Features & Benefits: Outdoor Sensor

Display Unit Features

Back of Display Unit Components

Identifies and describes the ports and switches on the rear of the display unit.

Front of Display Unit Components

Details the buttons and indicators on the front of the display unit.

Display Unit Functionality

Sensor Setup Procedures

Setting the A-B-C Switch

Instructions for setting the A-B-C switch for sensor synchronization.

Installing Batteries

Guide on how to correctly install batteries in the outdoor sensor.

Display Unit Setup Procedures

Setting the A-B-C Switch

Instructions for setting the A-B-C switch on the display unit.

Backup Batteries and Power Adapter

Guide for installing optional backup batteries and connecting the power adapter.

Time, Date, and Language Setup

Intelli-Time Clock Configuration

Steps to set the time zone and configure Intelli-Time clock settings.

Geographic Region Configuration

Instructions for selecting the geographic region for accurate forecasting.

Display Backlight Settings

Placement Guidelines

Display Unit Placement

Recommendations for optimal placement of the display unit for accuracy and visibility.

Outdoor Sensor Placement

Guidelines for positioning the outdoor sensor for best performance and longevity.

Important Placement Guidelines

Key considerations for ensuring accurate measurements and wireless range.

Operation and Forecasting

Using the Weather Station

Guidance on operating the weather station and understanding its forecasting features.

Multi-Variable History Chart

How to interpret and use the multi-variable history chart for data trends.

Barometric Pressure

Understanding barometric pressure readings and trend indicators.

High & Low Records

How to view and reset high and low temperature and humidity records.

Troubleshooting

Outdoor Sensor Reception Issues

Solutions for problems with the wireless signal between the sensor and display.

Display Screen Problems

Troubleshooting steps for a non-working or blank display screen.

Temperature and Humidity Accuracy

Tips for resolving inaccurate temperature or humidity readings.

Barometric Pressure Accuracy

Information on calibrating barometric pressure readings.

Forecast Accuracy Issues

Steps to troubleshoot and improve forecast accuracy.

Power Loss and Time Correction

Guidance for issues after power loss or battery replacement.

Care and Maintenance

Display and Sensor Cleaning

Instructions for cleaning the display unit and the outdoor sensor.

Battery Replacement and Calibration

Replace Intelli-Time Clock Battery

Procedure for replacing the coin-cell battery for the Intelli-Time clock.

Calibrate Weather Forecast

How to adjust the weather forecast for improved accuracy.

Specifications

FCC Information

Customer Support

Limited One Year Warranty

AcuRite 02007/06035RM Specifications

General IconGeneral
Display TypeLCD
Transmission Frequency433 MHz
Temperature Range (Indoor)32°F to 122°F (0°C to 50°C)
Wireless Range330 ft (100 m)
Update Interval30 seconds
Power (Sensor)2 AA batteries (not included)
Temperature Range (Outdoor)-4º to 158ºF / -20º to 70ºC

Related product manuals