Instruction Manual
Keywound Alarm Clock
model 15607
SAVE THIS MANUAL FOR FUTURE REFERENCE.
Questions? Contact Customer Support at
(877) 221-1252 or visit www.AcuRite.com
Set the Time
Turn TIME SET (5) in the direction of the arrow to set to correct time.
Wind the TIME WIND KEY (4) in the direction of the arrow.
Set the Alarm
1. Turn ALARM SET (2) in the direction of the arrow to the alarm time.
2. Wind the ALARM WIND KEY (3) in the direction of the arrow. The alarm
will automatically be set to go off each time the ALARM KEY is wound.
It is not necessary to pull out the ALARM SWITCH (1).
Silence the Alarm
Push the ALARM SWITCH (1) down.
Timekeeping Adjustment
This clock may require timekeeping adjustment due to shipping and handling. If
the clock runs fast, move the internal REGULATOR LEVER (6) slightly towards
the “-” sign to make the clock run slower. If the clock runs slow, move the internal
REGULATOR LEVER (6) slightly towards the “+” sign to make the clock run faster.
To Next Page
Need help?
General
