Acurus A2002 - Page 17

17
A 2 0 0 0 - S E R I E S A M P L I F I E R U S E R G U I D E
©2012 Indy Audio Labs, LLC all rights reserved / Revision20120420
Document No. 1000571
A2002 Architects and Engineering Specifications
The audio amplier shall provide 2 output channels and
produce 200W continuous power into 8 ohms, each
channel driven.
The unit shall include a 10/100 Ethernet port and an
RS-232 port for remote control and status monitoring.
A 12V Trigger port shall be included to allow remote on/
off triggering by an external preamp or power control
center. The amplier shall have an internal web server
which delivers a browser-compatible GUI. This GUI shall
allow for remote control and monitoring via computer or
mobile device/An RS-232 port.
The unit shall have adjustable front panel lighting levels
for dimly lit environments or bright rooms. The rear panel
shall have gold-plated input RCA connectors and gold-
plated 60A-rated loudspeaker binding posts.
The unit shall contain a worldwide congurable power
supply, and be compliant with FCC Part 15 and CE
requirements.
The unit shall be the Acurus A2002.
A2005 Architects and Engineering Specifications
The audio amplier shall provide 5 output channels and
produce 200W continuous power into 8 ohms, each
channel driven.
The unit shall include a 10/100 Ethernet port and an
RS-232 port for remote control and status monitoring. A
12V Trigger port shall be included to allow remote on/
off triggering by an external preamp or power control
center. The amplier shall have an internal web server
which delivers a browser-compatible GUI. This GUI shall
allow for remote control and monitoring via computer or
mobile device/An RS-232 port.
The unit shall have adjustable front panel lighting levels
for dimly lit environments or bright rooms. The rear panel
shall have gold-plated input RCA connectors and gold-
plated 60A-rated loudspeaker binding posts.
The unit shall contain a worldwide congurable power
supply, and be compliant with FCC Part 15 and CE
requirements.
The unit shall be the Acurus A2005.
A2007 Architects and Engineering Specifications
The audio amplier shall provide 7 output channels and
produce 200W continuous power into 8 ohms, each
channel driven.
The unit shall include a 10/100 Ethernet port and an
RS-232 port for remote control and status monitoring. A
12V Trigger port shall be included to allow remote on/
off triggering by an external preamp or power control
center. The amplier shall have an internal web server
which delivers a browser-compatible GUI. This GUI shall
allow for remote control and monitoring via computer or
mobile device/An RS-232 port.
The unit shall have adjustable front panel lighting levels
for dimly lit environments or bright rooms. The rear panel
shall have gold-plated input RCA connectors and gold-
plated 60A-rated loudspeaker binding posts.
The unit shall contain a worldwide congurable power
supply, and be compliant with FCC Part 15 and CE
requirements.
The unit shall be the Acurus A2007.
THX and Ultra2 are trademarks of THX Ltd.
THX is registered in some jurisdictions. All rights reserved.