Adam A7 User Manual

10
4. Speaker Adjustment
The Control Panel
On the rear side you will nd a control panel that allows detailed ne-tuning
of your loudspeakers to your particular room acoustics and personal listen-
ing preferences. The following tips are intended to assist you at using the
controls in the best manner.
Please note that using the controls may have a great impact on the overall
sound characteristics of your loudspeakers. We recommend using the con-
trols with utmost care and only after several audio tests with familiar record-
ings.
Tweeter Level
The voltage gain of the tweeter amplier (and therefore the complete tweeter
level) can be varied in a ±4 dB range. In case you have a considerably damped
room or if there is a special sound you are after, this control will serve you
well.
g. 6:
Inputs / Controls
RCA Input (unbalanced)
XLR Input (balanced)
Room EQ < 150 Hz
Room EQ > 6 kHz
Tweeter Level
4.1
4.2
ANALOG INPUTS CONTROLS
g. 7:
Tweeter Level

Adam A7 Specifications

General

Crossover Frequency	2.5 kHz
THD > 80 Hz	< 0.5 %
Long Term Output	≥ 102 dB
Type	Active Studio Monitor
Woofer	7-inch
Tweeter	1 x ART
Dimensions	13.5" x 8" x 11" (H x W x D)
Input Impedance	10 kOhms
Inputs	XLR
Amplifier Power RMS	50 W (Woofer) + 50 W (Tweeter)