Adam A7 User Manual

4
1. Safety Instructions
Please read the following safety instructions before setting up your
system. Keep the instructions for future reference. Please heed the
warnings and follow the instructions.
Caution: To reduce the risk of electric shock, do not open the loudspeaker.
There are no user-serviceable parts inside. Refer servicing to qualied service
personnel.
This product, as well as all attached extension cords, must be terminated
with an earth ground three-conductor AC mains power cord like the one sup-
plied with the product. To prevent shock hazard, all three components must
always be used.
Never replace any fuse with a value or type other than those specied. Never
bypass any fuse.
Always switch off your entire system before connecting or disconnecting any
cables, or when cleaning any components.
Please note that the diaphragms build up a magnetic eld. Do not ply with
magnetic items at close range to the diaphragms.
Do not use this apparatus near water. Do not expose this product to rain or
moisture, never wet the inside with any liquid and never pour or spill liquids
directly onto this unit. Please do not put any objects lled with liquids (e.g.
vases, etc.) onto the speaker.
$BVUJPO
3JTLPGFMFDUSJDBMTIPDL
%POPUPQFO
3JTRVFEFTIPDLFMFDUSJRVF
/FQBTPVWSJFS
$"65*0/503&%6$&5)&3*4,0''*3&03&-&$53*$4)0$,
%0/053&.07&#"$,$07&303"/:05)&31"35
/064&34&37*$"#-&1"354*/4*%&
%0/05&9104&5)*4&26*1.&/5503"*/03.0*4563&
3&'&34&37*$*/(5026"-*'*&%1&340//&-

Adam A7 Specifications

General

Crossover Frequency	2.5 kHz
THD > 80 Hz	< 0.5 %
Long Term Output	≥ 102 dB
Type	Active Studio Monitor
Woofer	7-inch
Tweeter	1 x ART
Dimensions	13.5" x 8" x 11" (H x W x D)
Input Impedance	10 kOhms
Inputs	XLR
Amplifier Power RMS	50 W (Woofer) + 50 W (Tweeter)