Need help?Do you have a question about the Adaptec 6405E and is the answer not in the manual?
General| Interface | PCIe 2.0 x8 |
|---|---|
| Ports | 4 internal |
| Data Transfer Rate | 6 Gb/s per port |
| Operating Temperature | 0°C to 55°C |
| Storage Temperature | -40°C to 70°C |
| Operating Humidity | 5% to 90% non-condensing |
| RAID Levels | 0, 1, 10 |
| Connectors | SFF-8087 |
Details on the TSID number for product identification and support.
Support contact details for North America, Europe, Japan, and Australia.
Statements covering FCC, UL, EU, Australia/NZ, Canada, and Japan regulations.
Outlines required knowledge and defines key terms used in the guide.
Guides users to additional documentation and resources for further help.
Lists all items included in the Adaptec RAID controller kit.
Specifies the hardware and software prerequisites for installation.
Covers general controller capabilities and RAID array management features.
Details features offering enhanced data protection and redundancy.
Information on battery/flash backup modules and firmware update procedures.
Details the features and specifications of specific Adaptec RAID controller models.
Guidance on choosing RAID levels, disk drives, and cables.
Covers bracket replacement, installation types, and basic steps.
Covers initial checks, controller installation, and bracket replacement.
Instructions for connecting internal/external drives and devices.
Directs users to the next tasks after installation.
Steps to set the boot controller and create RAID arrays using utilities.
Configuring the created array as a bootable device.
Steps to create a driver disk and prerequisites for OS installation.
Guides for installing controller drivers on various operating systems.
Covers driver disk creation and initial checks for existing OS installs.
Detailed steps for installing drivers on Windows, Linux, Solaris, VMware, and FreeBSD.
Introduces Adaptec Storage Manager, ARCCONF, ARC utility, and AFU.
Guidance on choosing the right utility for management tasks, including VMware.
Initial checks, monitoring disk status, and silencing alarms.
Procedures for recovering from disk failures and resetting the controller.
Covers SAS basics, terms, communication, ports, addresses, and connectors.
Details SAS cables, drive identification, connection options, and differences from SCSI.
Details RAID 0, 1, 1E, 10, 5, 5EE, 50, 6, and 60 arrays.
Helps users choose the best RAID level based on requirements.
Covers ARC utility basics, array/JBOD management, maxCache, and SerialSelect.
Details drive formatting, identification, and viewing the event log.
Outlines AFU system requirements and preparatory steps.
Guides for operating the AFU via menus, command line, and updating firmware.
Pinout and specifications for LED and I2C connectors across various Adaptec RAID controller models.
General guidelines for ensuring personal and equipment safety during operation.
Guidelines for preventing damage from electrostatic discharge during handling.
Details operating environment requirements and DC power specifications.
Lists the typical current draw for each Adaptec RAID controller model.
To Next Page
