Adaptive Micro Systems Alpha User Manual

Adaptive Micro Systems Alpha

18 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

1

Alpha

®

Serial Clock

User Manual

— Make sure DIP switch #8 is set to OFF (see page 17)

© 2008 Adaptive Micro Systems

Document No. 97033006 rev. B

March 24, 2008

Table of Contents

Other manuals for Adaptive Micro Systems Alpha

Installation And Operation Manual34 pages

Questions and Answers:

K
Karen KentJul 30, 2025
What to do if messages are not being displayed on my Adaptive Micro Systems Monitor?
- E
  eric77Jul 30, 2025
  If messages aren't showing on your Adaptive Micro Systems Monitor, there might be several reasons: * Check if the sign has power. * Ensure messages are programmed using the remote or a connected computer. * If messages were deleted, re-enter them. * Clean the sign’s air filters, as overheating can cause display issues.
C
Crystal DodsonAug 15, 2025
Why is the temperature displayed on my Adaptive Micro Systems Alpha not accurate?
- T
  Tamara GravesAug 15, 2025
  If the temperature displayed on your Adaptive Micro Systems Monitor is inaccurate, it could be due to the temperature probe not being mounted properly. Ensure it's in an open area, away from direct sunlight, and suspended in the air, not touching anything. Another cause may be that the temperature probe is not connected properly.

Adaptive Micro Systems Alpha Specifications

General

Brand	Adaptive Micro Systems
Model	Alpha
Category	Monitor
Language	English

Related product manuals

Preview: BetaBrite 1036