What to do if messages are not being displayed on my Adaptive Micro Systems Monitor?
If messages aren't showing on your Adaptive Micro Systems Monitor, there might be several reasons: * Check if the sign has power. * Ensure messages are programmed using the remote or a connected computer. * If messages were deleted, re-enter them. * Clean the sign’s air filters, as overheating can cause display issues.
Why is the temperature displayed on my Adaptive Micro Systems Alpha not accurate?
If the temperature displayed on your Adaptive Micro Systems Monitor is inaccurate, it could be due to the temperature probe not being mounted properly. Ensure it's in an open area, away from direct sunlight, and suspended in the air, not touching anything. Another cause may be that the temperature probe is not connected properly.
Lists detailed technical specifications including dimensions, LED color, input, and weight.
Explains the equipment's compliance with FCC rules for digital devices.
Describes the functions and layout of the infrared remote control keyboard.
Explains the methods for powering the sign on and off, including message retention.
Provides step-by-step instructions for setting the sign's internal clock and date.
Details the process to erase all programmed messages, graphics, and passwords from the sign.
Guides users on how to set a personal password to protect sign content.
Offers solutions for users who have forgotten their sign's password and need access.
Explains that clearing the sign's memory is required to remove a set password.
Details how to assign a unique serial address to the sign for network communication.
Describes how to adjust the sign's brightness based on time of day or manual settings.
Explains how to adjust the displayed temperature reading from an optional probe.
Details connecting the sign via an RS485 converter box for long-distance communication.
Explains connecting the sign directly using an RS232 serial port and custom cabling.
Provides detailed steps and warnings for securely mounting the Alpha Solar Sign to a wall.
Explains how to connect the sign for computer communication using RS485 signal wire.
Details how to connect the sign's internal power supply wiring to a power source.
Instructions on cleaning air filters to prevent overheating and ensure proper ventilation.
Addresses issues related to the sign not displaying messages, including power and programming.
Explains causes and solutions for incorrect temperature readings, focusing on probe placement.
General| Display Size | Not available |
|---|---|
| Resolution | Not available |
| Brightness | Not available |
| Contrast Ratio | Not available |
| Response Time | Not available |
| Viewing Angle | Not available |
| Input Voltage | Not available |
| Power Consumption | Not available |
| Operating Temperature | Not available |
| Storage Temperature | Not available |
| Weight | Not available |
| Dimensions | Not available |
To Next Page
