Adaptive Micro Systems Alpha User Manual

ALPHA® Solar™ Sign
12 Basic sign operation: Setting a sign’s temperature
Setting a sign’s temperature
NOTE: This section only applies if you have the optional external
temperature probe connected to your sign.
You can adjust the accuracy of the temperature displayed on your
sign:
Step When you do this... You see this...
1 Press PROGRAM.
2 Press BACK until TEMPERATURE appears.
3
Press SELECT to change from Celsius to
Fahrenheit.
4
Press ADV if you want to adjust the sign’s
temperature reading to match the actual temperature.
5
Press SELECT to increase the sign’s temperature
reading, or
press DELETE to decrease the sign’s temperature
reading.
6 Press RUN twice to set the sign’s adjusted temperature and return the sign to normal operation.
PROGRAM
TEXT FILE A
TEMPERATURE
20 C
TEMPERATURE
70 F
ENTER TEMP
70 F
ENTER TEMP
71 F

Adaptive Micro Systems Alpha Specifications

General

Brand	Adaptive Micro Systems
Model	Alpha
Category	Monitor
Language	English