Adaptive Micro Systems Beta Brite - Clearing a Signs Memory

BETA BRITE Programming Manual
8 Basic sign operation: Clearing a sign’s memory
Clearing a sign’s memory
Clearing a sign’s memory erases all messages and graphics that have
been programmed into the sign — also, the sign’s password (if any) will
be deleted.
Step When you do this... You see this...
1 Press PROGRAM .
2 Press BACK until CLEAR MEMORY appears.
3 Press ADV.
4
Press Y to clear the sign’s memory. The sign will return to normal operation and display a series of demo
messages.
PROG TEXT A
CLEAR MEMORY
WARNING!
THEN
CLEAR ALL? Y/N