BETA BRITE Programming Manual
Advanced text messaging: Example 8 — Speeding up and slowing down messages 27
Example 8 — Speeding up and slowing down messages
Messages can be speeded up or slowed down using the SPEED mode.
Once you pick a mode, like ROTATE, a speed can be selected by selecting
SPEED on the Remote Control. Then press SELECT to change the speed:
Here’s an example of how to vary the speed of the SCROLL mode of a
message:
Step When you do this... You see this...
1
Delete all the messages currently stored in the sign.
(See “Clearing a sign’s memory” on page 8 or “Example 5 — Deleting messages” on page 20.)
2 Press PROGRAM.
3 Press ADV.
4
Select the SCROLL mode.
(Press MODE and then
press SELECT until
[SCR]
appears.)
5 Press SPEED.
6
Press SELECT until
[SP1]
(very slow) appears.
7
Type
Scroll speed=1
(Press SYMBOL and then
SELECT to get the “=”
sign.)
8 Select SCROLL again.
[SP1] [SP2] [SP3] [SP4] [SP5] [NHL]
Slowest
speed
Fastest
speed
PROG TEXT A
A]
A] [SCR]
[SCR]
= Scroll mode, which we’ll use to demonstrate message speed.
[SP4]
is the default speed setting.
A] [SCR][SP4]
[SP1]
= very slow
A] [SCR][SP1]
A]croll speed=1
A] [SCR]
To Next Page
Loading...
Need help?
General