ADC AD-30 - Specifications

113063- 11 www.adclaundry.com 7
MAXIMUM CAPACITY (DRY WEIGHT) 30 lb
13.6 kg
TUMBLER DIAMETER 30”
76.2 cm
TUMBLER DEPTH 30”
76.2 cm
TUMBLER VOLUME 12.3 cu ft
347.5 L
TUMBLER / DRIVE MOTOR 1/2 hp
0.373 kW
BLOWER / FAN MOTOR
N / A
DOOR OPENING (DIAMETER) 21-1/2”
54.6 cm
DOOR SILL HEIGHT 33-1/4”
84.5 cm
WATER CONNECTION 3/4-11.5 NH
(North America)
3/4” B.S.P.T. (Outside North America)
DRYERS PER 20’/40’ CONTAINER 12 / 2 8
DRYERS PER 48’/53’ TRUCK 32 / 3 6
VOLTAGE AVAILABLE 120-480V 1,3ø 2,3,4w 50/60 Hz
APPROXIMATE NET WEIGHT 535 lb
242.7 kg
APPROXIMATE SHIPPING WEIGHT 585 lb
265.4 kg
AIRFLOW
60 Hz
600 cfm
17.0 cmm
50 Hz
500 cfm
14.2 cmm
HEAT INPUT 90,000 Btu/hr
22,680 kcal/hr
EXHAUST CONNECTION (DIAMETER) 8”
20.3 cm
INLET PIPE CONNECTION 1/2” M.N.P.T.
1/2” B.S.P.T.
(CE and Australia Only)
VOLTAGE AVAILABLE 208-480V 1,3ø 2,3,4w 50/60 Hz
APPROXIMATE NET WEIGHT 535 lb
242.7 kg
APPROXIMATE SHIPPING WEIGHT 585 lb
265.4 kg
AIRFLOW
60 Hz
460 cfm
13.0 cmm
50 Hz
383 cfm
10.8 cmm
EXHAUST CONNECTION (DIAMETER) 8”
20.3 cm
OVEN SIZE
kW Btu/hr
kcal/hr
20 68,200
17,200
24 81,900
20,600
VOLTAGE AVAILABLE 120-480V 1,3ø 2,3,4w 50/60 Hz
APPROXIMATE NET WEIGHT 580 lb
263.1 kg
APPROXIMATE SHIPPING WEIGHT 630 lb
285.8 kg
AIRFLOW
60 Hz
600 cfm
17.0 cmm
50 Hz
500 cfm
14.2 cmm
STEAM CONSUMPTION 104 lb/hr
47.2 kg/hr
OPERATING STEAM PRESSURE 125 psi max
8.6 bar
EXHAUST CONNECTION (DIAMETER) 8”
20.3 cm
COMPRESSED AIR CONNECTION 1/8” F.N.P.T.
COMPRESSED AIR VOLUME 0.5 cfh
0.014 cmh
BOILER HORSEPOWER (NORMAL LOAD) 3.0 Bhp
SUPPLY CONNECTION 1” F.N.P.T.
RETURN CONNECTION 1” F.N.P.T.
SECTION II
SPECIFICATIONS
A. SPECIFICATIONS
NOTE: ADC reserves the right to make changes in specifications at any time without notice or
obligation.
Shaded areas are stated in metric equivalents 5/7/14
* Specify air-operated or electromechanical steam damper system. Air-operated steam damper system must be
provided with clean, dry and regulated 80 psi ± 10 psi (5.51 bar ± 0.68 bar) air supply.
GAS
ELECTRICSTEAM*