54 American Dryer Corp. 113063-11
SECTION VIII
DATA LABEL INFORMATION
STANDARD LABEL
Contact American Dryer Corporation
When contacting American Dryer Corporation certain
information is required to ensure proper service/parts
information from ADC. This information is on the data
label located on the left side panel area behind the control
(access) door. When contacting ADC please have the
model number and serial number available.
1. Model Number – This describes the style of dryer and
type of heat (gas, electric, or steam).
2. Serial Number – Allows the manufacturer to gather
information on your particular dryer.
3. Type of Heat – This describes the type of heat for your
particular dryer, gas (either natural gas or propane gas),
electric, or steam.
4. Heat Input (For Gas Dryers) – This describes the heat
input in British thermal units per hour (Btu/hr) or kilowatts
(kW).
5. Orifice Size (For Gas Dryers) – Gives the number drill
size used.
6. Electric Service – This describes the voltage and current
rating for a particular model.
7. Gas Manifold Pressure (For Gas Dryers) – This
describes the manifold pressure taken at the gas valve
tap.
AGA LABEL
CE LABEL
To Next Page
Loading...
