Need help?Do you have a question about the ADC ES76 and is the answer not in the manual?
General| Brand | ADC |
|---|---|
| Model | ES76 |
| Category | Dryer |
| Drum Material | Stainless Steel |
| Wrinkle Prevention Option | Yes |
| Type | Electric |
| Voltage | 240V |
| Power Source | Electric |
| Control Type | Electronic |
| Lint Filter | Yes |
| Door Reversal | No |
Essential safety guidelines to prevent injury, fire, or explosion during operation and maintenance.
Details on daily, weekly, and periodic cleaning tasks for lint removal and overall dryer cleanliness.
Procedures for inspecting and adjusting belts, connections, and checking safety devices every 6 months.
Guidelines for proper dryer installation including ventilation, air flow, and enclosure specifications.
Standards and codes for electrical connections and gas supply, ensuring safe and compliant installation.
Step-by-step guide to verify dryer functionality and safety features after installation.
Overview of the main control panel, keypad, and the computer's role in dryer operation.
Details on the Glo-Bar, Gas Burner Assembly, and related ignition system parts.
Information on the Drive Motor and Blower Motor, including their locations and specifications.
Description of the dryer's tumbler, its ribs, and front/back assembly.
Explains Main Door Switch, Sail Switch, Hi-Limit Thermostat, and Lint Drawer Switch functions.
Details on the Lint Drawer and Lint Drawer Switch for lint collection and safety.
Covers the Reversing Rear Control Panel Assembly and its contactors.
Step-by-step instructions for replacing the computer, keypad, and temperature sensor probe.
Procedures for removing and replacing the Glo-Bar ignitor and the gas valve assembly.
Guide on testing and adjusting water column pressure for gas dryers.
Steps for converting from natural gas to L.P. gas and replacing burner tubes.
Instructions for replacing the Burner Hi-Limit and Lint Compartment Hi-Heat Protector thermostats.
Guidance on replacing door switches, door assemblies, and door glass.
Procedures for replacing and adjusting the sail switch for proper burner operation.
Steps for removing and replacing the dryer tumbler assembly and its support.
Instructions for replacing the drive belt and the drive motor.
Procedures for replacing the impellor motor and the impellor itself.
Steps to replace the lint drawer switch, a crucial safety component.
How to access and use the diagnostic mode for troubleshooting faults and events.
Explains how to use the help menu to view dryer status and feature information.
Describes faults related to exhaust and axial temperature probes and their clearing.
Details on SAIL SWITCH CLOSED and SAIL SWITCH OPEN faults and troubleshooting.
Explains Rotation Sensor Faults and Exhaust High Temp Faults.
Information on Blocked Coin Drop faults and other operational issues.
Explains event counts for radiant sensor, burner ignitor, and exhaust high limit.
Details on bad coin counts and rotation sensor fault events.
Information on S.A.F.E. DISABLED events related to fire detection systems.
Guide to interpreting information found on the dryer's data label for service.
Instructions on how to use a manometer to test gas pressure accurately.
A comprehensive list of tools needed for various maintenance and repair tasks.
To Next Page
