450269-2 www.amdry.com 27
3: HELP MENU
The help menu allows the user to view the status of different parts of the dryer. When a feature is highlighted, the
center section will list that feature and its current status. The items in the help menu will refer to the current running
cycle that was selected in Diagnostic Mode.
Pressing the HI/UP ARROW key will allow the user to move the highlighted bar around the help menu screen. For
example, highlighting “S” will show the status of the sail switch.
Pressing the PAUSE/STOP key will return the controls to Diagnostic Mode.
The table below shows the standard features available and the symbol they correlate with.
FEATURE
SYMBOL
FEATURE
TEXT
FEATURE FEATURE
INFORMATION
EXH EXHAUST
TEMP PROBE
Exhaust
Temperature Probe
(in Deg. F or C)
AXL AXIAL TEMP PROBE Axial Thermistor Probe (in Deg. F or C)
RPM TUMBLER
ROTATION SPEED
Tumbler Speed in
R
evolutions Per Minute
R.P.M.
MIN TIME REMAINING Time remaining
in the diag. cycle
0 to 99
(in minutes)
CODE HELP CODE MENU Help Menu Code Help Codes
T1 THERMOSTAT
BURNER 1
Thermostat
(Heat Output Burner 1)
ON - OFF
T2* THERMOSTAT
BURNER 2
Thermostat
(Heat Output Burner 2)
ON - OFF
H1 HEAT RETURN
BURNER 1
Heat Return Burner 1 ON - OFF
H2* HEAT RETURN
BURNER 2
Heat Return Burner 2 ON - OFF
C1 HEAT RELAY 1
CONTACTS
Heat relay 1 contacts OPEN - CLOSED
C2* HEAT RELAY 2
CONTACTS
Heat relay 2 contacts OPEN - CLOSED
B BLOWER Fan output ON - OFF
F FORWARD Forward drive output ON - OFF
R REVERSE Shows reversing
relay is on
ON - OFF
D DOOR Main Door OPEN - CLOSED
L LINT Lint Door OPEN - CLOSED
P WATER PRESSURE H
2
O Input ON - OFF
S SAIL SWITCH Sail Switch OPEN - CLOSED
V VAULT SWITCH Vault Switch OPEN - CLOSED
W WATER OUTPUT S.A.F.E. output ON - OFF
To Next Page
Loading...
