ADDER CCS-PRO - Network settings

17
INSTALLATIONCONFIGURATIONOPERATION
FURTHER
INFORMATION
INDEX
Network settings
To display the Network settings page
1 Access the CCS Manager.
2 On the left side, click the Conguration button.
3 On the left side, click the Network settings option.
The various network settings are as follows:
• Require a username and password to logon - When ticked, the unit will request
a valid username and password before allowing access to the CCS Manager.
• Obtain IP address automatically (DHCP) - When ticked, the unit will derive
its IP address, netmask and gateway settings from the DHCP (Dynamic Host
Conguration Protocol) server on the local network. Additionally, the optional Name
entry entered within the General Conguration section can also be used when
performing a DHCP search.
• Address, Netmask and Gateway - When the setting above is unticked, these three
elds are used to dene the fundamental network settings of the CCS-PRO4 unit. The
default settings are as follows:
• Address: 192.168.1.22
• Netmask: 255.255.255.0
• Gateway: 192.168.1.1
 When the Obtain IP address... option is ticked, these three elds will display the
settings that were dened by the DHCP server.