ADDER CCS-PRO - Appendix 1 - Cable Pin-Outs

32
INSTALLATIONCONFIGURATIONOPERATION
FURTHER
INFORMATION
INDEX
APPENDIX 1 – CABLE PIN-OUTS
The OPTIONS port uses a 10p10c socket which can accommodate both 10p10c
connectors as well as the much more common 8p8c connectors, which are used on
Ethernet leads and patch cables. The pin-outs are listed in this section for both types of
connector.
Serial remote control cable (8p8c)
Serial remote control cable (10p10c)
8p8c
connector
D-Type female
9 way
62
TXD RXD
3
2
3
5
RXD
GND
TXD
GND
10p10c
connector
D-Type female
9 way
72
TXD RXD
4
3
3
5
RXD
GND
TXD
GND
Note: You can also use the optional serial cable (part number VSC40).