welcome contents
installation
& operation
special
configuration
furter
information
2
Welcome
Introduction
Thank you for choosing the Adder X200 extender
set. These compact modules allow you to remotely
control up to two computer systems from a
common keyboard, video monitor, mouse and
speaker set. The controlling peripherals can be
situated up to 300 metres* from each computer
system (* X200AS skew compensation model).
Peripheral connections to each computer system are
handled by Computer Access Modules (or CAMs).
The long distance link between the CAMs and the
common X200 module is made via Category 5, 5e
or 6 twisted pair cabling.
Special circuitry within the remote module allows
you to make adjustments to the sharpness and
brightness settings to suit your own preferences.
HT
X200 model range
Extender pair packages (X200 + CAM)
X200-USB/P 100m extender pair, USB CAM, no audio, no de-skew
X200A-USB/P 100m extender pair, USB CAM, audio, no de-skew
X200AS-USB/P 300m extender pair, USB CAM, audio and de-skew
X200 receivers only (for use with CATx switches etc.)
X200 /R 100m receiver, no audio, no de-skew
X200A /R 100m receiver, audio, no de-skew
X200AS /R 300m receiver, audio and de-skew
X200 modules can be used to connect to
individual computer systems via CAMs or to
many computers via AdderView CATx switches
To Next Page
Loading...
Need help?
General
