7
(Alarm transmission)
Alarm protocols SIA (level 1 to 3) reference SIA DC-03-1990.01(R2003.10)
Contact ID reference SIA DC-05-1999.09
FF (Scancom)
Robofon (dial capture only)
Telim (dial capture only)
CESA (dial capture only)
Tamper detection Dial capture interface
Serial Interface
Pin inputs
Fault reporting to Transmission interface/path fault
Monitoring Center
Relay outputs (solid-state)
Maximum operating voltage 28V DC
Maximum current rating 100mA DC
Power supply
Supply voltage 5-28 VDC
Typical current 80mA @ 12VDC, 40mA @ 24VDC
Maximum current 1A @12VDC
Recommended external PSU 12V DC 1A 12 Watt
Environmental
Operating temperature range -10°C to 55°C
Operating humidity range 95% max., non-condensing
Weights and dimensions
Physical dimensions 87mm x 55mm x 16mm
Terminal weight 85 grams (with wire harness)
Fully packaged weight 200 grams
(when external to alarm panel
enclosure and configured
accordingly)
Note:
Cabling must not exceed 3 meters
Note:
Cabling must not exceed 3 meters
To Next Page
Loading...
