EasyManua.ls Logo

AddSecure IRIS-4 160 - User Manual

AddSecure IRIS-4 160
62 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
IRIS-4 Technical Reference Manual.docx 12/01/2023
IRIS-4
Terminals
Technical Reference
Manual

Table of Contents

Other manuals for AddSecure IRIS-4 160

Question and Answer IconNeed help?

Do you have a question about the AddSecure IRIS-4 160 and is the answer not in the manual?

Summary

Basic Setup

Before You Begin

Covers initial setup steps, including ARC, Ethernet, and Cellular details.

Recommended Installation Sequence

Provides a step-by-step guide for installing the terminal.

Welcome Menus and Password Setup

Covers initial welcome screens like language selection and installer password setup.

Configuring the Terminal

Installation Wizard Access and Initial Settings

Accessing the wizard and initial settings like interfaces and battery backup.

Account, ARC IP, and Communication Configuration

Settings for account, ARC IP, and communication paths (Ethernet, Wi-Fi, Cellular, PSTN).

Communication Tests and Troubleshooting

Explains performing and interpreting communication tests and troubleshooting failures.

Ethernet Setup and Testing

Guides on setting up and testing the Ethernet connection and IP addressing.

Wi-Fi Setup and Testing

Guides on setting up and testing the Wi-Fi connection and settings.

Cellular Setup and Testing

Guides on setting up and testing the cellular connection, including registration and signal strength.

Cellular Settings Configuration

Configuring APN, Username, Password, and SIM PIN for cellular.

Cellular Communication Tests and PSTN Setup

Performing cellular tests and guides on PSTN setup and connection testing.

Setup Completion and Installer App Configuration

Completing setup and configuring the 160 via the Installer App.

Settings

Network Interfaces and Account Settings

Selecting network paths and configuring account name/number.

ARC IP Address and Ethernet 1 Configuration

Setting ARC IP and configuring the primary Ethernet port.

Ethernet 2 Configuration

Settings for the secondary Ethernet port, including bridge or routed modes.

Cellular Settings Overview

Options to view and change cellular (2/3/4G) settings, starting with Signal Strength.

Trouble Reporting

Setup for reporting communication faults via relays or SMS.

PSTN Settings

Adjusts how alarms are handled over a PSTN connection.

Reflash

Controls reprogramming the terminal to the latest software.

Reflash Now

Immediately starts a software reflash and displays progress.

Installation for EN54-21:2006 Compliance

Installation, Configuration, and Commissioning

Covers installation, configuration, and commissioning for EN54-21 compliance.

Configuration Requirements for EN54-21 Fire Mode

Specific configuration settings for EN54-21 Fire mode.

Installation for VdS 2463 Compliance

Introduction and Installation Kit

Introduces VdS2463 standard and details the compliant enclosure and wiring kit.

VdS Mode Operation

Explains changes in terminal functions when operating in VdS modes.

VdS Intruder Applications

Details relay assignments and pin assignments for VdS Intruder mode.

VdS Fire Applications

Details relay assignments and pin assignments for VdS Fire mode.

Trouble Reporting and Test

Trouble Report Explanations

Lists and explains various trouble reports displayed on the terminal.

Test Procedures

Accesses test options for communication paths and network scans, explaining results.

Maintenance

Technical Specifications

Appendix 1: Setting Up the IRIS Toolbox

AddSecure IRIS-4 160 Specifications

General IconGeneral
TouchscreenCapacitive
Operating SystemAndroid
Memory1GB RAM
DisplayTFT-LCD
Storage8 GB
ConnectivityWi-Fi, Bluetooth
Operating Temperature-10°C to 50°C
CertificationsCE, FCC

Related product manuals