54
Weather Station with Wireless Outdoor Sensor WS 1600
Base station
You can operate the wireless weather station with the
mains adaptor or with batteries.
If the wireless weather station is connected to a mains
socket, then it operates via mains power, even when the
batteries are inserted in the device. Remove discharged
batteries from the battery compartment, since they can leak.
NOTE on material damage
For operation via mains power, use only the
mains adaptor delivered with the weather
station.
Current mode
1. Insert the plug of the supplied mains adaptor into the
connection socket of the base station.
2. Plug the mains adaptor into a socket that has a voltage
corresponding to that described under “Technical Data”.
3. Wait approx. 30minutes. The base station requires this
time to collect all weather data and to receive radio
signals from the time signal transmitter.
Battery operation
1. With some force, press on the battery compartment
cover and slide it to the side.
2. Insert 2 batteries of the type LR6 (AA)/1.5 V as depicted
on the bottom of the battery compartment. Pay
attention to the correct polarity (+/-).
3. Then slide the battery compartment cover back into
place.
FW Station 1600.indb 54 12.04.2016 13:04:53
To Next Page
Loading...
