ADE WS 1600 - Cleaning; Display Light

71
Weather Station with Wireless Outdoor Sensor WS 1600
English
Display light
Battery operation
− Press the SNOOZE/LIGHT button to switch on
the display light of the base station for approx.
15seconds.
Mains operation
If you operate the base station using the mains adaptor
over the mains supply, the display is permanently lit.
Set brightness
− Set the BACKLIGHT slide control to the desired
brightness level.
HI = High brightness
LO = Low brightness
Cleaning
1. During operation via the mains: Pull the mains adaptor
plug out of the base station.
2. As necessary, wipe the base station and the outdoor
sensor clean with a lightly-dampened cloth.
3. Dry the device completely before you reconnect it with
the mains adaptor.
FW Station 1600.indb 71 12.04.2016 13:04:54