ADE WS 1600 - Problem Solving; Troubleshooting Guide

72
Weather Station with Wireless Outdoor Sensor WS 1600
Fault/Remedy
Fault Possible Cause
The DCF77 signal for the
time cannot be received.
 Check the chosen
location.
 Start the signal
reception manually, if
necessary.
 Adjust the time
manually.
The temperature
information of the sensor
seems too high.
 Check whether the
sensor has been
exposed to direct
sunlight.
Instead of showing the
measured values for
temperature or humidity,
the display shows H.HH or
LL.L.
 The values lie
above or below the
measurement range.
In the OUT region of the
display, no values are
shown..
 Press and hold
in
order to start wireless
reception to the outdoor
sensor manually.
The temperature indicator
is blinking on the display.
 The temperature alert
has triggered. Press
on ALERT as often
as needed until the
blinking stops.
FW Station 1600.indb 72 12.04.2016 13:04:54