ADE WS 1907 - Setting the Time and Date Manually

60
WS 1907 digital rain gauge with DCF radio clock
3. To restart the reception process manually, keep
the HIST/UP button pressed for a few seconds. Pay
attention to the indication on the display.
Setting the time and date manually
 If there is a delay of more than approx.
20 seconds between two pushes of a
button, the setting process is automatically
terminated.
 To speed up the progress of the displayed
values, keep the HIST/UP or DOWN button
pressed while making settings.
1. Keep the MODE/SET button pressed until the
temperature unit of measurement flashes on the
display (“°C” or “°F”).
2. Use the HIST/UP or DOWN button to select the desired
unit of measurement.
3. Press MODE/SET.
4. Proceed as previously described:
− Press the HIST/UP and DOWN buttons to set the
desired value.
− Press MODE/SET to save the setting you have
made.
5. Carry out the following settings:
− Rainfall unit of measurement (millimetres or inches)