73
WS 1907 digital rain gauge with DCF radio clock
English
Alarm
General information
The device enables to set two alarm times (ALARM1 and
ALARM2) that can be used either individually or together.
For example, you can use ALARM1 to be woken up during
the week and ALARM2 to be woken up at a later hour at
the weekend.
The procedure for setting ALARM1 and ALARM2 is
identical.
Setting the alarm time
If there is more than approx. 20 seconds
between two pushes of a button, the setting
process automatically ends and you will have
to repeat it.
Keep the HIST/UP or DOWN button pressed
to speed up the progress of the displayed
values.
Starting from the normal time display
1. Press MODE/SET once or twice to select “AL1” or “AL2”.
Note the display.
2. Then press and hold down MODE/SET until the
wake-up hour flashes.
3. Use HIST/UP or DOWN to set the desired wake-up
hour.
4. Press MODE/SET.
To Next Page
Loading...
Need help?
General
