EasyManua.ls Logo

ADE WS 1907 - Troubleshooting

ADE WS 1907
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
77
WS 1907 digital rain gauge with DCF radio clock
English
Rain gauge
1. Remove the rain funnel as described in chapter
Wireless rain gauge.
2. Carefully remove dirt, insects etc. from the rain gauge.
3. Clean the rain funnel and especially the funnel outlet.
4. Replace the rain funnel. The locking tabs must click into
place.
Never use oil to clean, preserve parts or make it
easier for them to pass through.
Fault/Remedy
Fault Possible cause
The DCF77 signal for
the time cannot be
received.
Check the chosen location.
Start the signal reception
manually, if necessary.
Adjust the time manually.
The displayed
temperature values
appear too high.
Check if the base station or
radio gauge is exposed to
direct sunlight.
Instead of showing
the measured values
for temperature or
humidity, the display
shows H.HH or LL.L.
The values lie above or
below the measurement
range.

Table of Contents

Related product manuals