78
WS 1907 digital rain gauge with DCF radio clock
Fault Possible cause
The indicator is
illegible, the function
is unclear, or the values
are obviously false.
Remove the batteries for a
few moments.
The base station
receives no signals
from the wireless
rain gauge (“- - -” is
displayed in the RAIN
line).
Make sure there are no
sources of electrical
interference near the rain
gauge or the base station.
Check the batteries in the
rain gauge.
Move the base station
closer to the rain gauge or
vice versa.
To start the signal
transmission manually,
keep the HIST/UP button
pressed for a few seconds.
The time differs by
exactly one, two, three,
etc. hours.
You have probably set an
incorrect time zone. For
most countries in Europe,
“00” is the correct setting.
To Next Page
Loading...
