76
WS 1907 digital rain gauge with DCF radio clock
The alarm signal will be muted for a few minutes based
on the settings made (5 minutes by default). Then the
device switches back on and the alarm sounds again. This
procedure can be repeated multiple times.
Other functions
Turn on display lighting
− Press the SNOOZE/LIGHT button to switch on
the display light of the base station for approx.
15 seconds.
Battery change indicator
− Change the respective batteries when the battery
replacement symbol is displayed in the IN (base
station) or OUT (rain gauge) area.
− Proceed as described in the chapter “Starting up”.
Cleaning
Base station
− Wipe clean the base station with a slightly damp cloth,
if necessary.
To Next Page
Loading...
