43
Weather station WS 2324
No data display from the wireless outdoor sensor
1. Check that the batteries are inserted the right way
round.
2. Check whether the location of the wireless
outdoor sensor is suitable; see “Choosing a
location”.
Starting signal reception manually
17:10
11
28
6
c
3
FRIDAY
M
D
OUTDOOR TEMP
26
6
c
If the radio signal symbol to the left is no longer
displayed, the radio signals from the time signal
transmitter are no longer being received. The
time indicator nevertheless continues precisely.
− Press and hold the WAVE button until the radio
signal symbol is displayed again. This is how you
manually start (and end, if required) the signal
reception.
If the reception was not successful, the reception
symbol disappears after a few minutes and the time
on the display continues to run normally.
Upon successful signal reception, the base
station adjusts itself to the time of the time signal
transmitter. If you have already made manual
time and date settings, they will be adjusted
automatically.
Only the WAVE button is active during the signal search.
Pressing the WAVE button again cancels the signal
search.
English
To Next Page
Loading...
