ADE WS 2324 - Changing the Batteries; Displaying Stored Temperatures; Other Weather Data and Functions

49
Weather station WS 2324
Other weather data and functions
Displaying stored temperatures
The base station starts memorising the maximum and
minimum temperature values once the temperature value
is displayed.
1. Press the MEM button to display the following values
successively:
− highest indoor and outdoor temperature (MAX)
− lowest indoor and outdoor temperature (MIN)
− current indoor and outdoor temperature
2. Pressing and holding the MEM button for more than
2seconds deletes the saved values.
 If “LL.L” or “HH.H” appears on the display,
the temperature is below or above the
display range.
 The display reverts to the current temperature
if no button is pressed for 5seconds.
 The recorded readings are automatically
deleted every night at midnight.
Changing the batteries
The battery symbol indicates that the inserted
batteries should be replaced.
 The battery symbol in the indoor temperature display
indicates that you need to change the batteries in the
base station.
English