ADEMCO 6150RF User Manual

K4461-1 6/00
6150RF
Keypad/Transceiver
USER GUIDE
Keypad Features
DISPLAY
The keypad features a 2-digit numeric display for zone identification and pre-designated English-
language prompts (e.g., “ALARM,” “AWAY,” “STAY,” “CHECK,” etc.) for indicating system status.
See Figure 1.
FUNCTION KEYS
The function keys are located behind a decorative door and are continuously backlit for ease in use.
(Check the User’s Guide that accompanies the control panel for detailed instructions on the use of
these keys.)
The function keys include keys for panic alarm activation. The panic alarms are activated by
pressing key pairs [1] & [*], [3] & [#], or [*] & [#], or a Special Function Key (see below). Whether
these panic keys function and the type of panic alarms they produce is determined by the control
panel’s capability and programming. (Check with your installer for the availability and type of alarm
of these panic keys.)
SOUNDER
The sounder is a piezo-electric sounder that pulses for fire alarms and sounds continuously for
burglary and audible panic alarms.
KEYPAD LEDS
The keypad contains two LEDs that indicate the status of the system as follows:
LED Function
Green Lights when the system is ready to arm (no zone faults are present).
Red Lights when the system is armed.
SPECIAL FUNCTION KEYS
These are four keys located to the left of the numeric keys (see
Figure 1
). The keys may be
programmed by your installer for panic alarms or other special functions such as macros (a
frequently used series of key entries).
Function keys must be held down for at least 2 seconds
to activate an alarm. (Check with your installer for the programmed function of these keys.)
1
OFF
4
MAX
7
INSTANT
READY
2
AWAY
5
TEST
8
CODE
0
3
STAY
6
BYPASS
9
CHIME
#
ARMED
READY
Figure 1: 6150RF Keypad/Transceiver with Front Door Removed

ADEMCO 6150RF Specifications

General

Brand	ADEMCO
Model	6150RF
Category	Keypad
Language	English

Summary

Keypad Features Overview

Keypad Display Functionality

The keypad features a 2-digit numeric display for zone identification and pre-designated English-language prompts.

Keypad Function Keys

Keys behind a decorative door, continuously backlit, used for panic alarm activation and other functions.

Keypad Sounder

Piezo-electric sounder that pulses for fire alarms and sounds continuously for burglary and audible panic alarms.

Keypad Status LEDs

Two LEDs indicating system status: Green (ready to arm, no faults), Red (system armed).

Special Function Keys

Four keys left of numeric keys, programmable for panic alarms or macros, require holding for 2 seconds to activate.

User Mode Operations

Entering User Mode

Access User mode by pressing [1] and [3] keys simultaneously after the unit has been powered for at least 1 minute.

Managing Transmitter Status

Enable/disable wireless keys (1-8) by entering their number and '1' (enable) or '0' (disable) on the display.

Exiting User Mode

Exit User mode by pressing [*] when 'dE' and '-' flash alternately on the display.