ADEMCO UVS - Feature Priority; Feature Priorities (1=highest)

Feature Priority
– 17 –
Feature Priority
Each feature has a pre-assigned priority that is listed below. When
there is an attempt to activate more than one feature at the same
time, the system determines which feature has a higher priority and
allows that feature to become active after suspending or terminating
any lower-priority feature that is active.
Feature Priorities (1=highest)
Priority Feature Priority Feature
1 Central Station 2-Way
Voice
5 Intercom
2 Voice Message
Annunciation
6 Speakerphone
3 Alarm Bell/Siren
Annunciation
7 Music Broadcast (or Idle)
Mode
4 User 2-Way Voice
NOTE:
Device may not perform as intended when subjected to radio
frequency electro-magnetic amplitude modulated in excess of 1V/m.