Adexa ZBS-15 - Operating Instructions

Ice on making, if S at right top hand of it,then means small size ice on making
if L at right bottom hand,then means large size ice on making
Crushed ice in process
Button
Operation
CRUSHED ICE
Press it, get to get the crushed ice.
Press it again, the unit will stop crushed ice in 5seconds
SMALL or LARGE
Press button SMALL to turn on/off the small size ice making function
Press button LARGE to turn on/off the large size ice making function
ON/OFF
Press it to turn on or off the power
Operating Instructions
Step 1
Plug in the machine into the socket.
Step 2
Add water as Sketch A or Sketch B
Sketch A Add Water by Manual
Sketch B Connect Unit to Water Faucet
Step 3
Press ON/OFF button to turn on or off the power.
Step 4
Water will be pumped into the water tray from the water reservoir automatically,this takes about 30
seconds
Note: If no water is pumped to the water tray over two cycles but the water in reservoir is enough, then
please open the drain cap, and let several drops water runs out. Then press ON/OFF button
again to restart the unit
Step 5
Select the button SMALL,LARGE to start the ice making function you may need