Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com Phone +39.0438.30.91.31
Document code: MN67660_ENG Revision 1.000 Page 20 of 30
PLC CONFIGURATION (for EtherNet/IP):
The configuration and commissioning of the EtherNet/IP Converter as described on the following pages was accomplished with the help of
the “RSLogix 5000” software of Rockwell Automation. In case of using a control system from another supplier please attend to the
associated documentation.
These are the steps to follow:
1) Create a "Generic Ethernet Module" under the Ethernet section in the I/O Configuration tree.
To Next Page
Loading...
