19
USING THE TIMER
1. Press C to start timer.
2. Press D to stop timer. Press and hold D to reset.
TIMER SETTING
1. In timer mode, press and hold A to enter setting mode; timer type will begin flashing.
2. Press D and E to select count up timer, count down stop, or count down repeat.
3. Press B to set and advance to hour.
4. Press D to decrease and E to increase.
5. Press B to set and advance to next setting value.
6. Setting sequence is timer type, hour, minute, second.
7. Press A to save data and exit setting mode.
INTERVAL TIMER MODE
1. Press B to change to interval timer mode.
2. Press D to scroll through timers.
3. Press E to view different segments within each interval set.
NOTE: Module can store up to 3 interval sets, each of which can have a maximum of
6 segments.
USING THE INTERVAL TIMER
1. Press C to start timer.
2. Press E while interval timer is running to toggle views.
3. Press D to stop timer. Press and hold D to reset.
INTERVAL TIMER SETTING
1. In interval timer mode, press and hold A to enter setting mode; timer type will
begin flashing.
2. Press D and E to select count down stop or count down repeat timer.
3. Press B to set and advance to hour.
4. Press D to decrease and E to increase.
5. Press B to set and advance to next setting value.
6. Setting sequence is timer type, hour, minute, second.
7. Press B to advance to next segment, and repeat hour, minute, second setting.
8. Press A to save data and exit setting mode.
EDITING SEGMENTS
1. In interval timer mode, press D to select the timer.
2. Press E to select segment within the interval timer.
3. Press and hold A to edit segment; hour will begin flashing.
4. Press D to decrease and E to increase.
5. Press B to set and advance to next setting value.
6. Setting sequence is hour, minute, second.
7. Press A to save data and exit setting mode.
CHRONOGRAPH MODE
Your watch is equipped with the ability to turn the front button into a touch sensitive
To Next Page
Loading...