8
TWEEN ANALOG-DIGITAL
NORMAL TIME DISPLAY
1. Press B to change modes.
2. Press A for EL.
3. Press C to select 12/24 hour format.
4. Press D to enable/disable hourly chime.
TIME SETTING
1. In time mode, press and hold A for 2 seconds to
enter time setting; hour will begin flashing.
2. Press C to increase setting value. Press D to decrease setting value.
3. Press B to enter next setting field.
4. Setting sequence is hour, minute, second, year, month, date.
5. Press A to exit setting mode.
ALARM MODE
1. Press B to enter alarm mode.
2. Press C to select alarm 1 or alarm 2.
3. Press D to enable/disable alarm.
ALARM SETTING
1. Press and hold A for 2 seconds to enter alarm setting; hour will begin flashing.
2. Press C to increase setting value. Press D to decrease setting value.
3. Press B to set minutes.
4. Press A to exit setting mode.
Note: Alarm turns on automatically when exiting setting mode.
TIMER MODE
1. Press C to start timer.
2. Press D to stop timer.
3. Press and hold D for 2 seconds to reset timer.
TIMER SETTING
1. In timer mode, press and hold A to enter setting mode; timer type will begin flashing.
2. Press C to select countdown/stop, count-up, or countdown repeat timer.
3. Press B to set and advance to timer preset value.
4. Press C to increase setting value; press D to decrease setting value.
5. Press A to exit setting mode.
CHRONO MODE
1. Press B to enter chrono mode.
2. Press C to start chrono.
3. Press D to stop chrono.
To Next Page
Loading...