ADJ Products, LLC - www.adj.com - 12PX Hex/12PX Hex Pearl User Manual Page 17
12PX Hex/12PX Hex Pearl
Primary-Secondary
Configuration
Primary-Secondary Configuration:
This function will allows you to link units together to run in a Primary-Secondary mode. In
Primary-Secondary operation one unit will act as the controlling unit and the others will react to
the controlling units built-in programs. Any unit can act as a Primary or as a Secondary however,
only one unit can be programmed to act as the “Primary.”
Primary-Secondary Connections and Settings:
1. Daisy chain your units via the XLR connector on the rear of the unit. Use standard XLR data
cables to link your units together. Remember
that the Male XLR connector is the
input and the Female XLR connector is the ouput. The first unit in the chain (primary) will use
the female XLR connector only. The last unit in the chain will use the male XLR connector only.
2. Set the “Primary” unit to your desired mode of operation.
3. Connect the first “Secondary” unit to the “Primary
.”
4. On the “Secondary” unit press the MODE button until “SECd” is displayed. The “Secondary” unit
will now follow the “Primary”.
To Next Page
Loading...
