ADJ FOCUS SPOT 2X - Offset Menu

ADJ Products, LLC - www.adj.com - Focus Spot 2X User Manual Page 21
Focus Spot 2X Offset Menu
-128~127
-128~127
OPTIONSOFFSET MENU
Pan Offset
Tilt Offset
Focus Offset 000~255
Prism Offset
000~255
-128~127
Gobo Offset
-128~127
R Gobo Offset
-128~127
Color Offset
To enter the Oset Menu, press the MENU button to unlock the display, then press the ENTER
button for at least 5 seconds. In this submenu you are able to adjust the home position of the pan,
tilt, focus, prism, gobo wheel, rotating gobo, and color wheel. To exit this menu press and hold the
MENU button.
Pan Oset - Adjustment of the pan home position.
1. Press the ENTER button for at least 5 seconds, then press the UP or DOWN buttons so that “Pan Offset
”
is displayed, press ENTER.
2. Use the UP and DOWN buttons to make your adjustments, and then press ENTER to conrm.
Press the MENU button for one second to exit.
Tilt Oset - Adjustment of the tilt home position.
1. Press the ENTER button for at least 5 seconds, then press the UP or DOWN buttons so that “Tilt Offset”
is displayed, press ENTER.
2. Use the UP and DOWN buttons to make your adjustments, and then press ENTER to conrm.
Press the MENU button for one second to exit.
Focus Oset - Setting adjustment for the focus.
1. Press the ENTER button for at least 3 seconds, then press the UP or DOWN
buttons so that
“Focus Offset” is displayed, press ENTER.
2. Use the UP and DOWN buttons to make your adjustments, and then press ENTER to conrm.
Press the MENU button for one second to exit.
Prism Oset - Setting adjustment for the prism.
1. Press the ENTER button for at least 5 seconds, then press the UP or DOWN buttons so that “Prism Offset”
i s displayed, press ENTER.
2. Use the UP and DOWN buttons to make your adjustments, and then press ENTER
to conrm.
Press the MENU button for one second to exit.