ADJ INNO SPOT PRO - Fixture Time

ADJ Products, LLC - www.adj.com - Inno Spot ProInstruction Manual Page 15ADJ Products, LLC - www.adj.com - Inno Spot ProInstruction Manual Page 14
1. Press the MENU button until “Dimmer Calibrat” is displayed,
press ENTER.
2. A number between 50-100 will be displayed. This number rep-
resents the instensity setting. Use the UP or DOWN buttons to
adjust the LED output intensity. 50 being medium intensity, and
100 being full intensity.
3. When you have found your desired setting press ENTER to
conrm.
Auto Test - This function will run a self test program.
1. Press the MENU button until “Auto Test” is displayed, press
ENTER.
2. The xture will now run a self test. Press the MENU button to
exit.
Temp. - With this function you can display the running
temperature of the unit.
1. Tap the MENU button until “Temp.” is displayed, press
ENTER.
2. The current running temperature of the xture will now be
displayed. Press MENU to exit.
Fixture Time - With this function you can display the
running time of the unit.
1. Tap the MENU button until “Fixture Time” is displayed, press
ENTER.
2. The running time of the xture will now be displayed. Press
MENU to exit.
Inno Spot Pro System Menu
Fixture Version - This will display the software version
1. Tap the MENU button until “Fixture Version” is displayed. Press
the ENTER button and the software vesion will be displayed.
2. Press the MENU button to leave this function.
Reset - Use this function to reset the unit.
1. Tap the MENU button until “Reset” is displayed, press
ENTER.
2. The xture will now reset.
Inno Spot Pro System Menu