Need help?Do you have a question about the ADJ Mega Bar 50RGB RC and is the answer not in the manual?
Guidance for checking the shipping carton and contents for damage or missing parts.
Details the Mega Bar 50RGB RC as a DMX intelligent LED color wash with multiple operating modes.
Provides contact details and service hours for customer assistance and inquiries.
Includes warnings about electrical shock, moisture, and energy-saving notices.
Read these instructions carefully for optimal performance and safety information.
Lists features like multi-colors, dimming, operating modes, DMX, and remote control.
Details the 3-year limited warranty and the procedure for validating and servicing the product.
Explains the automatic voltage sensing for universal power compatibility.
Defines DMX as a universal communication protocol for intelligent fixtures.
Describes how to link fixtures and the effect of DMX addressing on data transmission.
Specifies the need for approved DMX-512 110 Ohm data cables with XLR connectors.
Illustrates XLR pin assignments and conversion between 3-pin and 5-pin DMX connectors.
Explains the use of a terminator to avoid erratic behavior with long cable runs.
Instructions for toggling the LED display ON or setting it to turn OFF after inactivity.
Details Manual Color, Color Change, Fade, Auto, Sound Active, RGB, and DMX modes.
Explains how to link units in a primary/secondary configuration for synchronized operation.
Guide to selecting and setting a static color using the MODE and UP/DOWN buttons.
Instructions for setting the speed of automatic color changes and fades.
How to activate Auto Mode and Sound Active mode with sensitivity adjustment.
Adjusting RGB intensity and configuring DMX channel modes and addresses.
How to activate the fixture's infrared receiver for remote control.
Explains the remote's functions, effective range, and receiver activation requirement.
Details on using buttons like BLACKOUT, AUTO RUN, PROGRAM SELECTION, FLASH, SPEED, SOUND ACTIVE, SECD, RGB.
How to select DMX modes and set the DMX address using the remote control.
Steps to set DMX mode and address using the remote, including LED feedback.
Beam spread and lux levels for red light at various distances.
Beam spread and lux levels for green light at various distances.
Beam spread and lux levels for blue light at various distances.
Beam spread and lux levels for RGB full on at various distances.
Troubleshooting steps for DMX connectivity issues, checking cables and wiring.
Notes on sound sensitivity and types of sounds that activate the unit.
Details on warranty coverage, purchase requirements, and service procedures.
Lists specific warranty durations for different product types, including LED products.
Guidance for checking the shipping carton and contents for damage or missing parts.
Details the Mega Bar 50RGB RC as a DMX intelligent LED color wash with multiple operating modes.
Provides contact details and service hours for customer assistance and inquiries.
Includes warnings about electrical shock, moisture, and energy-saving notices.
Read these instructions carefully for optimal performance and safety information.
Lists features like multi-colors, dimming, operating modes, DMX, and remote control.
Details the 3-year limited warranty and the procedure for validating and servicing the product.
Explains the automatic voltage sensing for universal power compatibility.
Defines DMX as a universal communication protocol for intelligent fixtures.
Describes how to link fixtures and the effect of DMX addressing on data transmission.
Specifies the need for approved DMX-512 110 Ohm data cables with XLR connectors.
Illustrates XLR pin assignments and conversion between 3-pin and 5-pin DMX connectors.
Explains the use of a terminator to avoid erratic behavior with long cable runs.
Instructions for toggling the LED display ON or setting it to turn OFF after inactivity.
Details Manual Color, Color Change, Fade, Auto, Sound Active, RGB, and DMX modes.
Explains how to link units in a primary/secondary configuration for synchronized operation.
Guide to selecting and setting a static color using the MODE and UP/DOWN buttons.
Instructions for setting the speed of automatic color changes and fades.
How to activate Auto Mode and Sound Active mode with sensitivity adjustment.
Adjusting RGB intensity and configuring DMX channel modes and addresses.
How to activate the fixture's infrared receiver for remote control.
Explains the remote's functions, effective range, and receiver activation requirement.
Details on using buttons like BLACKOUT, AUTO RUN, PROGRAM SELECTION, FLASH, SPEED, SOUND ACTIVE, SECD, RGB.
How to select DMX modes and set the DMX address using the remote control.
Steps to set DMX mode and address using the remote, including LED feedback.
Beam spread and lux levels for red light at various distances.
Beam spread and lux levels for green light at various distances.
Beam spread and lux levels for blue light at various distances.
Beam spread and lux levels for RGB full on at various distances.
Troubleshooting steps for DMX connectivity issues, checking cables and wiring.
Notes on sound sensitivity and types of sounds that activate the unit.
Details on warranty coverage, purchase requirements, and service procedures.
Lists specific warranty durations for different product types, including LED products.
General| Type | LED Flood Light |
|---|---|
| LED Color | RGB |
| Control | DMX, Remote Control |
| Dimming | 0-100% |
| Power Supply | AC 100-240V, 50/60Hz |
| Operating Modes | Auto, Sound Active, DMX |
To Next Page
