To Next PageTo Next Page
Need help?Do you have a question about the ADJ MEGA 64 PROFILE PLUS and is the answer not in the manual?
Guidance on checking the shipping carton and fixture for damage upon arrival.
Details the Mega 64 Profile Plus as a DMX intelligent LED par fixture with multiple modes.
Provides ADJ customer support contact details and operating hours.
Explains DMX communication, linking fixtures, and data transmission principles.
Details required DMX cables, including XLR connectors and shielded cable specifications.
Guidance on using a terminator for stable DMX signal transmission over long cable runs.
Information on using 5-pin DMX cables and necessary adapters for 3-pin systems.
Instructions for managing the LED display, including on/off and inversion settings.
Introduction to the five main operating modes: RGB+UV, Sound Active, Auto Run, Static, and DMX.
How to control RGB+UV colors and activate strobe effects.
Activating Sound Active mode and adjusting sensitivity for audio response.
Selecting and configuring color fade, change, or combined modes with speed control.
Choosing from 64 static colors and controlling the flash rate.
Using a DMX controller to manage fixture traits and create custom programs.
Setting behavior for lost DMX signals and selecting dimmer curve profiles.
Procedure to revert all operating modes to their factory default settings.
How to activate the remote receiver and use the ADJ LED RC for fixture control.
Connecting and configuring units for master-slave operation using XLR cables.
Detailed use of remote buttons, activation, and color/brightness adjustments.
Steps to configure DMX channel modes and addresses for external controller integration.
DMX channel mapping for Red, Green, Blue, and UV intensity control.
DMX channel mapping for RGB, UV, and Master Dimmer functions.
DMX channel mapping for RGB, UV, Shutter/Strobe, and Master Dimmer.
DMX channel assignments for RGB, UV, Shutter/Strobe, Master Dimmer, and program selection.
Detailed functions for channels 8, 9, and 10 in the 10-channel DMX mode.
Guidance on connecting multiple fixtures in series for power distribution.
Data on light output, beam spread, and dimmer curve characteristics.
Common problems and solutions for units not responding to DMX signals.
Troubleshooting steps for units that do not react to sound in Sound Active mode.
Guidance on checking the shipping carton and fixture for damage upon arrival.
Details the Mega 64 Profile Plus as a DMX intelligent LED par fixture with multiple modes.
Provides ADJ customer support contact details and operating hours.
Explains DMX communication, linking fixtures, and data transmission principles.
Details required DMX cables, including XLR connectors and shielded cable specifications.
Guidance on using a terminator for stable DMX signal transmission over long cable runs.
Information on using 5-pin DMX cables and necessary adapters for 3-pin systems.
Instructions for managing the LED display, including on/off and inversion settings.
Introduction to the five main operating modes: RGB+UV, Sound Active, Auto Run, Static, and DMX.
How to control RGB+UV colors and activate strobe effects.
Activating Sound Active mode and adjusting sensitivity for audio response.
Selecting and configuring color fade, change, or combined modes with speed control.
Choosing from 64 static colors and controlling the flash rate.
Using a DMX controller to manage fixture traits and create custom programs.
Setting behavior for lost DMX signals and selecting dimmer curve profiles.
Procedure to revert all operating modes to their factory default settings.
How to activate the remote receiver and use the ADJ LED RC for fixture control.
Connecting and configuring units for master-slave operation using XLR cables.
Detailed use of remote buttons, activation, and color/brightness adjustments.
Steps to configure DMX channel modes and addresses for external controller integration.
DMX channel mapping for Red, Green, Blue, and UV intensity control.
DMX channel mapping for RGB, UV, and Master Dimmer functions.
DMX channel mapping for RGB, UV, Shutter/Strobe, and Master Dimmer.
DMX channel assignments for RGB, UV, Shutter/Strobe, Master Dimmer, and program selection.
Detailed functions for channels 8, 9, and 10 in the 10-channel DMX mode.
Guidance on connecting multiple fixtures in series for power distribution.
Data on light output, beam spread, and dimmer curve characteristics.
Common problems and solutions for units not responding to DMX signals.
Troubleshooting steps for units that do not react to sound in Sound Active mode.
Power| voltage | 100V ~ 240V / 50~60Hz |
|---|---|
| power draw | 54W |
| fuse | 2A |
Lighting and Color| LEDs | 12 x 4W 4-in-1 Quad LED’s |
|---|---|
| beam angle | 25 Degrees |
| colors | RGB+UV Color Mixing |
Control and Modes| DMX channels | 5 |
|---|---|
| DMX modes | 4 Channel Mode, 5 Channel Mode, 6 Channel Mode, 9 Channel Mode, & 10 Channel Mode |
| power cord daisy chain | 12 Fixtures Max |
Weight and Dimensions| weight | 5 lbs / 2.1 kgs |
|---|---|
| dimensions | 10.5” (L) x 10.25” (W) x 4.5” (H) 261 x 260 x 110 mm |
