ADJ FLAT PAR QWH12XS - User Manual

User Instructions
3/15
©2015 ADJ Products, LLC all rights reserved. Information,
specications, diagrams, images, and instructions herein are
subject to change without notice. ADJ Products, LLC logo and
identifying product names and numbers herein are trademarks
of ADJ Products, LLC. Copyright protection claimed includes all
forms and matters of copyrightable materials and information
now allowed by statutory or judicial law or hereinafter granted.
Product names used in this document may be trademarks or
registered trademarks of their respective companies and are
hereby acknowledged. All non-ADJ Products, LLC brands and
product names are trademarks or registered trademarks of their
respective companies.
ADJ Products, LLC and all aliated companies hereby dis-
claim any and all liabilities for property, equipment, building, and
electrical damages, injuries to any persons, and direct or indi-
rect economic loss associated with the use or reliance of any
information contained within this document, and/or as a result
of the improper, unsafe, unsucient and negligent assembly,
installation, rigging, and operation of this product.
Europe Energy Saving Notice
Energy Saving Matters (EuP 2009/125/EC)
Saving electric energy is a key to help protecting the enviroment.
Please turn o all electrical products when they are not in use. To
avoid power consumption in idle mode, disconnect all electrical
equipment from power when not in use. Thank you!
FLAT PAR QWH12XS

Summary

General Instructions

Warranty Registration

Safety Precautions

Electrical Safety Warnings

Essential safety advice regarding electrical shock and fire hazards for the unit.

Operational Safety Guidelines

Recommendations for safe operation, mounting, ventilation, and avoiding damage.

Set Up Procedures

Power Supply and Voltage

Information about the unit's auto-sensing voltage and power connection.

DMX Protocol Basics

Explanation of DMX-512, its purpose, and how fixtures are linked via DMX.

DMX Data Cable Requirements

Details on necessary DMX cables, connectors, and specifications for reliable data transmission.

Operating Instructions

Static Color Mode

ADJ LED RC 2 Remote Control

Operating Modes Overview

Auto Mode Operation

DMX Control Configuration

Steps to set DMX address and select DMX channel modes for controller operation.

Sound Active Mode Operation

RGBW Dimmer Mode

DMX Mode Selection

Guide to setting the DMX address and choosing from the 8 available DMX channel modes.

Installation Guide

Fuse Replacement

Troubleshooting Guide

DMX Unit Not Responding

Sound Mode Unit Not Responding

Warranty Information

ADJ FLAT PAR QWH12XS Specifications

Power

voltage	100V ~ 240V / 50~60Hz
power consumption	80W
fuse	1 Amp

Weight and Dimensions

weight	7 lbs / 3.2 kg
length	13 in / 328 mm
width	11 in / 280 mm
height	4.5 in / 115 mm