To Next PageTo Next PageHow to troubleshoot ADJ Flood Light not responding to DMX?
If your ADJ Flood Light unit is not responding to DMX, verify that the DMX cables are properly connected and correctly wired, ensuring pin 3 is hot (note that on some DMX devices, pin 2 may be hot). Also, confirm that all cables are connected to the correct connectors, paying attention to the input and output connections.
What to do if ADJ 5P HEX Flood Light does not respond to sound?
If your ADJ Flood Light unit does not respond to sound, ensure that Sound Active mode is activated. Note that quiet or high-pitched sounds might not activate the unit.
Notice regarding energy saving practices as per EuP directive.
Guidance on carefully checking the shipping carton for damage.
Information on how to contact ADJ Products for assistance and questions.
Instructions for securely mounting the fixture and safety cable usage.
Comprehensive warnings on electrical shock, fire, water exposure, and proper handling.
Details on auto-voltage sensing and introduction to DMX-512 protocol.
Instructions for connecting fixtures via DMX, cable requirements, and line termination.
How to lock the control panel and overview of available operating modes.
Setting up DMX address and selecting 4 DMX channel modes.
Using RGBWA+UV, Sound Active, Program, Static Color, and RF control.
Adjusting dimmer curves, DMX state behavior, and color macros.
Linking units for synchronized operation in Master-Slave mode.
Connecting multiple fixtures for power using IEC sockets.
Detailed functions and value ranges for 6 and 7-channel DMX modes.
Detailed functions and value ranges for 8 and 12-channel DMX modes.
Reference for color macro combinations based on DMX values.
Charts detailing beam angle, intensity, and dimmer curve effects.
Procedure for replacing a fuse and common troubleshooting solutions.
Instructions for cleaning internal and external optical lenses.
Terms and conditions of the limited warranty for ADJ Products.
Specific warranty durations for different product types and components.
Detailed technical data including voltage, power, dimensions, and DMX modes.
Notice regarding energy saving practices as per EuP directive.
Guidance on carefully checking the shipping carton for damage.
Information on how to contact ADJ Products for assistance and questions.
Instructions for securely mounting the fixture and safety cable usage.
Comprehensive warnings on electrical shock, fire, water exposure, and proper handling.
Details on auto-voltage sensing and introduction to DMX-512 protocol.
Instructions for connecting fixtures via DMX, cable requirements, and line termination.
How to lock the control panel and overview of available operating modes.
Setting up DMX address and selecting 4 DMX channel modes.
Using RGBWA+UV, Sound Active, Program, Static Color, and RF control.
Adjusting dimmer curves, DMX state behavior, and color macros.
Linking units for synchronized operation in Master-Slave mode.
Connecting multiple fixtures for power using IEC sockets.
Detailed functions and value ranges for 6 and 7-channel DMX modes.
Detailed functions and value ranges for 8 and 12-channel DMX modes.
Reference for color macro combinations based on DMX values.
Charts detailing beam angle, intensity, and dimmer curve effects.
Procedure for replacing a fuse and common troubleshooting solutions.
Instructions for cleaning internal and external optical lenses.
Terms and conditions of the limited warranty for ADJ Products.
Specific warranty durations for different product types and components.
Detailed technical data including voltage, power, dimensions, and DMX modes.
Electrical Specifications| voltage | 100V ~ 240V/50~60Hz |
|---|---|
| power draw | 60W |
| fuse | 1 Amp |
Light and Optics| LEDs | 5 x 10W 6-in- Hex LEDs |
|---|---|
| beam angle | 30 Degrees |
| colors | RGBAW + UV |
Weight and Dimensions| weight | 5lbs./ 2.02Kgs. |
|---|---|
| length | 9” |
| width | 8.5” |
| height | 4.75” |
